Presentations
I. Invited Lectures
(12) J.-H. Lee, “Microscopic high-strain-rate mechanical characterization using laser-propelled particles”, ME Seminar Series, Stanford (2017).
(11) J.-H. Lee, “High-strain-rate mechanical characterization of materials at the microscale using laser-propelled single particle impacts”, Saint-Gobain Northboro R&D Center (2017).
(10) J.-H. Lee, “Dynamic mechanical characterization using micro-bullets”, Rensselaer Polytechnic Institute (RPI) MANE Seminar Series (2016).
(9) J.-H. Lee, “Micro-ballistics for Characterization of Materials Properties at High Strain Rates”, Boston University MechE Seminar Series (2016).
(8) J.-H. Lee, “Micro-ballistic characterization of nanomaterials”, Material Research Society (MRS) Boston (2015).
(7) J.-H. Lee, “Micro-ballistics: Utilization of Supersonic Micro-bullets for Extreme Material Characterization”, Mechanical and Industrial Engineering Seminar Series, Northeastern University (2015).
(6) J.-H. Lee, “Simulation of cold spray using laser-induced single particle impact, CSAT Meeting, Worcester Polytechnic Institute (2015).
(5) J.-H. Lee, “Engineering of materials via designable physical structures”, Polymer Science and Engineering Seminar Series, University of Massachusetts Amherst (2014).
(4) J.-H. Lee, “Engineering of materials via designable physical structures”, Condensed Matter Physics Seminar Series, University of Massachusetts Amherst (2014).
(3) J.-H. Lee, “High-strain-rate mechanical properties of multilayer graphene”, Halliburton in Houston (2014).
(2) J.-H. Lee, “Micro-ballistics: a new approach for nanomaterial dynamics”, Materials Science Seminar Series, Gwangju Institute of Science and Technology (GIST), South Korea (2014).
(1) J.-H. Lee, “High-strain-rate mechanical characterization of nanomaterials via micro-ballistics”, Condensed Matter Physics Seminar Series, Iowa State University (2013).
II. Conference Presentations
(17) Wanting Xie, Arash Alizadeh, Xuemei Wang, Aaron Nardi, Steven Kooi, Victor K. Champagne, Sinan Muftu, Jae-Hwang Lee*, “Prediction of Extreme Dynamic Behaviors of Aluminum Microspheres in Supersonic Consolidation”, Materials Research Society (MRS) Meeting, Boston, MA (2016).
(16) Wanting Xie, Arash Alizadeh, Xuemei Wang, Aaron Nardi, Steven Kooi, Victor K. Champagne, Sinan Muftu, Jae-Hwang Lee*, “Micro-ballistic Experiment of Single Aluminum Particles for Cold Spray Additive Manufacturing”, Materials Research Society (MRS) Meeting, Boston, MA (2016).
(15) W. Xie, J.-H. Lee, “Parametric Single Micro-Particle Impact Study in Cold Spray”, NEW Mech Conference at Harvard (2016).
(14) A. Kazemi Moridani, J.-H. Lee, “Spectrally-engineered Polarized Thermal Emitters for IR Applications”, NEW Mech Conference at Harvard (2016).
(13) J.-H. Lee, E.L. Thomas, “Laser induced projectile impact test for high-strain rate characterization of nanomaterials”, TMS 142th Annual Meeting & Exhibition, San Antonio, TX (2013).
(12) J.-H. Lee, D. Veysset, K. Nelson, E.L. Thomas, “ Microscopic ballistic test of periodic nanostructured polymers”, ASME International Mechanical Engineering Congress & Exposition, Houston, TX (2012).
(11) J.-H. Lee, D. Veysset, K. Nelson, E.L. Thomas, “ Laser induced projectile impact test (LIPIT): A micron-scale ballistic test for high-strain rate mechanical study of nano-structures”, American Physics Society (APS) March Meeting, Boston, MA (2012).
(10) J.-H. Lee, C.R. Stewart-Sloan, E.L. Thomas, “Microdomain morphology of diblock copolymer within 3D photonic crystals created by interference lithography”, Materials Research Society (MRS) Meeting, Boston, MA (2011).
(9) J.-H. Lee, E.L. Thomas, “Carbon-epoxy Composite Nano-structure with an Interlocked 3D Periodic Network”, Materials Research Society (MRS) Meeting, Boston, MA (2010).
(8) J.-H. Lee, L. Wang, G. Saini, J. Singer, D. Veysset, S. Kooi, E.L. Thomas, M.C. Boyce, K.A. Nelson, “Ultra light weight micro-trusses and photopatterned Nanocomposites”, ISN Army Industry Collaboration Conference, Cambridge, MA (2010).
(7) J.-H. Lee, L. Wang, S. Kooi, M.C. Boyce, E.L. Thomas, “Mechanical properties of holographically-defined porous polymers and carbonized polymers” American Physical Society (APS) March Meeting, Portland, OR (2010).
(6) J.-H. Lee, E.L. Thomas, “High-temperature carbonization of 3D polymeric nano-structures for optical and mechanical applications”, Materials Research Society (MRS) Meeting, San Francisco, CA (2009).
(5) J.-H. Lee, W. Leung, K. Constant, K.-M. Ho, “Strongly polarized thermal emission from three-dimensional metallic photonic crystals”, Photonic & Electromagnetic Crystal Structures VII, Monterey, CA (2007).
(4) J.-H. Lee, Z. Ye, K. Constant, K. –M. Ho, “Tailorable polymer waveguides for miniaturized bio-photonic devices via two-polymer microtransfer molding”, Photonics Optics, San Diego, CA (2006).
(3) J.-H. Lee, Y.-S. Kim, J.-M. Park, W. Leung, C.-H. Kim, P. Kuang, R. Biswas, K. Constant, and K. -M. Ho, “Three-dimensional photonic crystals by soft lithographic technique”, Annual Department of Energy Solid-State Lighting Program Planning Workshop, Orlando, FL (2006)
(2) J.-H. Lee, C.-H. Kim, K. Constant, and K.-M. Ho, “Tailorable, 3D microfabrication for photonic applications: Two-polymer microtransfer molding”, Photonics West, San Jose, CA (2006).
(1) J.-H. Lee, C.-H. Kim, Y.-S. Kim, H, Kang, W. Leung, R. Biswas, C. H. Oh, K. Constant, and K.-M. Ho, “Layer-by-layer metallic and ceramic photonic crystals fabricated by soft lithography for optical regime”, Materials Research Society (MRS) Meeting, San Francisco, CA (2005).